[DeTomaso] Techno Question: Lower front ball joints
cengles at cox.net
cengles at cox.net
Mon Feb 20 09:38:33 EST 2012
Dear Julian,
Yes! The rubber dust boot is exactly what I was referring to. Thanks for the correction and information.
Warmest regards, Chuck Engles
---- Julian Kift <julian_kift at hotmail.com> wrote:
>Chuck,
By plastic seal you mean the rubber dust boot?
Suitable dust boots are available from NAPA part #6501178. I redid mine with sturdier Energy Suspension part # 9-13119.
Julian
> From: cengles at cox.net
> To: detomaso at realbig.com
> Date: Sun, 19 Feb 2012 20:15:56 -0600
> Subject: [DeTomaso] Techno Question: Lower front ball joints
>
> Dear Forum,
>
>
>
>
>
> I am making preparations for the Run to Phoenix and
> discovered that the plastic seal around the front lower ball joints is shot
> on the left and starting to fail on the right. IIRC they were replaced
> about ten years ago.
>
>
>
> The Dumb Question: can one simply replace only the failing seal
> and continue to use the ball joint or must a new ball joint be placed?
>
>
>
>
>
> Its always *something*, Chuck
> Engles
More information about the DeTomaso
mailing list