[DeTomaso] Pantera Parts Connection Rotors - opinions?
Brent Stewart
bjbstewart at yahoo.com
Tue Feb 14 17:07:25 EST 2012
That's funny - I spoke to EBC today as well, and they said they were disc/hub combos! Seems something I need to follow up on!
brent
________________________________
From: John Buckman <jb841 at cox.net>
To: Ian Hannington <ihannington286720mi at comcast.net>
Cc: Pantera List Serve <detomaso at realbig.com>; Brent Stewart <bjbstewart at yahoo.com>; MikeLDrew at aol.com
Sent: Tuesday, February 14, 2012 1:48 PM
Subject: Re: [DeTomaso] Pantera Parts Connection Rotors - opinions?
Here's the info that I got today:
Brake Labs: One piece rotor and hub (visual inspection).
Disc Italia: One piece rotor and hub (visual inspection). When I asked why the website listed the rotor
as "disc only", he said that only fits applications with disc brakes and not drum brakes. DOH!!
EBC Rotors: Rotor only, no hub. The guy that I spoke with called another department, and was
told that it was a rotor only. This was based on weight only (19#), and was not a visual
inspection.
We'll see what Julian finds out at Summit re the EBC rotors.
John
On Feb 14, 2012, at 4:45 AM, Ian Hannington wrote:
> I put the EBC Sport rotors on my car a few years ago, which is a one piece
> rotor/hub design. I don't remember them having the other cast iron rotor
> they show now, so maybe it is a rotor only. I did have a problem with the
> EBC rotor being too large of a diameter and had to have an eight inch milled
> off as the caliper rubbed on the top of the rotor. Other than that they
> worked fine. I went with the EBC's because they were one of the only
> non-Chinese vented rotors I could find at the time.
>
> Sometime after I installed those rotors, I did find these from Disc-Italia
> which claim to be "disc only".
> http://www.brakeworld.com/ProductList.aspx?c=1&y=1967&m=FORD&mod=MUSTANG
>
> I never did call to confirm this though, so you may add them to your list of
> places to call today.
>
> Whatever you end up doing, have someone physically open the box and look at
> them before shipping them to you. They are heavy and return shipping is
> very pricey........Been there done that!
>
> Good luck,
>
> Ian
>
>
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
> Behalf Of John Buckman
> Sent: Monday, February 13, 2012 8:02 PM
> To: detomaso at realbig.com
> Subject: [DeTomaso] Pantera Parts Connection Rotors - opinions?
>
> And to stir the drifting pot a little more.......EBC Rotors shows '67
> Mustang rotors only, #UPR7173. It is plain (no slots or drilling) and is
> listed as made from "high quality cast iron", $108.77 ea with free shipping.
> They also have a "Sport" rotor, #GD7173 at $363.33 / pair with free
> shipping. The Sport rotor is dimpled and slotted, and is made from "high
> quality grey iron".
>
> http://ebcrotors.com/c-62_1967-ford-mustang_ebc-rotors.aspx
>
> I will call them tomorrow to verify that this does not include the hub.
>
> John
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list