[DeTomaso] Pantera Parts Connection Rotors - opinions?

[Julian Kift]

I actually need to run over to Summit Racing today for a few parts today, so I'll ask them to open up the box on these rotor options and report back.
 
Having the Summit store a couple blocks away is a godsend or a devil's temptation depending if you take my view or my wife's. But I could say the same about Macy's :>)
 
Julian
 

> From: ihannington286720mi at comcast.net
> To: jb841 at cox.net; detomaso at realbig.com
> Date: Tue, 14 Feb 2012 07:45:52 -0500
> Subject: Re: [DeTomaso] Pantera Parts Connection Rotors - opinions?
> 
> I put the EBC Sport rotors on my car a few years ago, which is a one piece
> rotor/hub design. I don't remember them having the other cast iron rotor
> they show now, so maybe it is a rotor only. I did have a problem with the
> EBC rotor being too large of a diameter and had to have an eight inch milled
> off as the caliper rubbed on the top of the rotor. Other than that they
> worked fine. I went with the EBC's because they were one of the only
> non-Chinese vented rotors I could find at the time.
> 
> Sometime after I installed those rotors, I did find these from Disc-Italia
> which claim to be "disc only".
> http://www.brakeworld.com/ProductList.aspx?c=1&y=1967&m=FORD&mod=MUSTANG
> 
> I never did call to confirm this though, so you may add them to your list of
> places to call today.
> 
> Whatever you end up doing, have someone physically open the box and look at
> them before shipping them to you. They are heavy and return shipping is
> very pricey........Been there done that!
> 
> Good luck,
> 
> Ian
> 
> 
> 
> -----Original Message-----
> From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
> Behalf Of John Buckman
> Sent: Monday, February 13, 2012 8:02 PM
> To: detomaso at realbig.com
> Subject: [DeTomaso] Pantera Parts Connection Rotors - opinions?
> 
> And to stir the drifting pot a little more.......EBC Rotors shows '67
> Mustang rotors only, #UPR7173. It is plain (no slots or drilling) and is
> listed as made from "high quality cast iron", $108.77 ea with free shipping.
> They also have a "Sport" rotor, #GD7173 at $363.33 / pair with free
> shipping. The Sport rotor is dimpled and slotted, and is made from "high
> quality grey iron". 
> 
> http://ebcrotors.com/c-62_1967-ford-mustang_ebc-rotors.aspx 
> 
> I will call them tomorrow to verify that this does not include the hub.
> 
> John
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso