[DeTomaso] Steel vs aluminum flywheel

[Dave Londry]

Sounds like it will move off fine either way.
(I read FWHP and saw front-wheel for a second there - heh!)
dave


On 07/02/2012 9:18 PM, Ken Green wrote:
> Guys,
>   
>     I have a new McLeod steel flywheel (which I think had a removable 28 oz balance wt), and a new Hays aluminum internal balance flywheel.  One will hopefully eventually go into a twin turbo street motor, looking for about 800 FWHP and using 3.2 gears.  I was thinking that the steel flywheel would be more forgiving with these gears, although when I ran a Dynomation simulation, my motor would have twice the torque at 1,000 RPM of a normally aspirated engine with a big cam and carb due to the cam the turbos like, so I think either flywheel will work well on the street.
>   
>      Any thoughts on this?
>   
> Ken
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>