[DeTomaso] Arm Rest Removal Problem
Jerry Knotts
knottsj at galstar.com
Thu Dec 20 13:35:26 EST 2012
Another easy trick is to use a reverse rotation drill bit. They are
usually sold in Helicoil kits but are available at machine shop supply
houses, like Wholesale Tool. The bit will actually help you unscrew the
offending bolt or screw.
jerry
On 12/20/2012 11:20 AM, John Buckman wrote:
> "If you push a short metal tube in the armrest hole you may be able to
> drill away the screw head without damaging the armrest."
>
>>>> The tube will protect the armrest, but it will not keep the screw and threaded insert from turning
> when drilling. If the tube ID was slightly smaller than the screw head, it (the tube) could be
> driven over the screw head and then held with vise grips while drilling, that might work.
>
> John
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> DeTomaso mailing list
> DeTomaso at poca.com
> http://poca.com/mailman/listinfo/detomaso
>
>
More information about the DeTomaso
mailing list