[DeTomaso] Signal-cancel cam
MikeLDrew at aol.com
MikeLDrew at aol.com
Wed Aug 29 02:10:00 EDT 2012
In a message dated 8/27/12 11 08 48, davel at emspace.com writes:
>
> So the real problem is getting the wheel to agree - nothing to do with the
> steering assembly.
> Take the wheel-indexing ring off the adapter (secured by 9 hex screws - so
> 40 degrees apart)
> Rotate it by 2 screws = 80 degrees, so 10 degrees off, of course.
> (if they'd used 8 screws it would have been a piece of cake)
> Let it go for the moment.
>
>>>I'm in Guam so don't have a car to look at, at the moment.
Are there an even number of screws holding the wheel to the hub? Because if
not, then rotating the hub 180 degrees would then allow for a more
convenient alignment of the screws holding the wheel to the hub.
I just installed a LeCarra wheel on a Pantera a few weeks ago, and we got
it to line up perfectly--cam at 9 o'clock, and wheel perfectly centered on
the hub.
Mike
More information about the DeTomaso
mailing list