[DeTomaso] ARP Flywheel/PressurePlate bolts
B Hower
b.hower3400 at yahoo.com
Fri Aug 24 15:42:38 EDT 2012
I used ARP 11-2801 flywheel bolts and ARP 150-2201 pressure plate bolts in conjunction with a 2510 Pro-Comp steel billet 25# flywheel and a type 2 HD McLeod pressure plate. To use this flywheel, which is about 1/4" thinner than OEM I had to get a throw out/hub assembly from Dennis Q. at PPCI. With standard assembly the throw out hub traveled too far forward and hung up on the ZF snout.
Bud #3400
--- On Thu, 8/23/12, sean mundy <seanmundy at hotmail.com> wrote:
From: sean mundy <seanmundy at hotmail.com>
Subject: [DeTomaso] ARP Flywheel/PressurePlate bolts
To: "detomaso at realbig.com" <detomaso at realbig.com>
Date: Thursday, August 23, 2012, 6:39 PM
I need to reinstall my flywheel and clutch for the 6th time. Thinking it might be a good time to upgrade the bolts. Anybody know the ARP #'s for the flywheel and pressure plate bolts? Thanks! Sean M.
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list