[DeTomaso] Removing ANSA resonator tips?
MikeLDrew at aol.com
MikeLDrew at aol.com
Thu Aug 23 11:24:24 EDT 2012
In a message dated 8/23/12 6 45 31, jjdetrich at gmail.com writes:
> So why not put
> a straight pipe inside the can, you could even put a Y in the pipe so
> that the exhaust exits both tips.
>
>>>That is exactly what I did. Lots of work to cut the muffler can open,
gut the internals and replace with a Y-pipe of perforated tubing (I actually
used solid tubing because I couldn't lay hands on perforated tubing in
time, and used a plasma cutter to cut holes in it), and filled the can with
stainless steel muffler packing to provide sound absorbtion. The result was
only a 12 hp gain; Dan Jones did the before-and-after testing on the dyno, and
then did the math and discovered that the area of the pipe entering the
front of the muffler was substantially greater than the area of the two
resonator tips, hence the start of this thread--the suggestion that removing the
resonators from the tips would free them up.
> >It would be interesting to see what
> kind of pipe is used in the Mind Trains. Is it solid or is it
> perforated to get some sound deadening?
>
>>>They are just cheap hot-rod glass-pack mufflers, cherry-bomb style.
Mike
More information about the DeTomaso
mailing list