[DeTomaso] Mechanics of after marker suspension bushings?
Roland Jaeckel
pantera874 at t-online.de
Sat Aug 18 13:14:49 EDT 2012
Then, you didn't use factory bushings. They all are bonded to the sleeves.
Am 18.08.2012 um 18:59 schrieb "Tomas Gunnarsson" <guson at home.se>:
> The new factory bushings I used were not bonded to both sleeves.
>
> Tomas
> -----Original Message-----
> From: Pantdino [mailto:pantdino at aol.com]
> Sent: den 18 augusti 2012 08:37
> To: guson at home.se; fisher95020 at yahoo.com; kenn_green at yahoo.com;
> detomaso at realbig.com
> Subject: Re: [DeTomaso] Mechanics of after marker suspension bushings?
>
>
> Stock rubber bushings are supposed to be bonded to the inner and outer
> sleeves. So, yes, you do have to tighten the bolt/nut at the normal ride
> height or the rubber will be under constant tension and thus fail sooner.
>
>
> Aftermarket bushings are usually nylon, delrin, or some other kind of
> harder material and are NOT bonded to the metal sleeve(s). This is because
> that material will not stretch like rubber does and if there were no motion
> between the sleeves and bushing material between them the suspension could
> not move. It has been too long since I did my bushings for me to remember
> where that motion occurs, but I installed Zerk fittings in the outer sleeves
> so I could lube them when they started to squeak, so I would think at least
> some of it must be between the bushing material and the outer sleeve.
>
>
> Jim
>
>
> -----Original Message-----
> From: Tomas Gunnarsson <guson at home.se>
> To: David D Fisher <fisher95020 at yahoo.com>; Ken Green
> <kenn_green at yahoo.com>; Pantera List Serve <detomaso at realbig.com>
> Sent: Thu, Aug 16, 2012 10:44 am
> Subject: Re: [DeTomaso] Mechanics of after marker suspension bushings?
>
>
> I found that the rubber is not stuck to both the inside and outside tube of
> the bushing. Initially they flex but if you make a 90 degree movement the
> bushing stays where you set it. So tightening at ride height is not really
> necessary IMO.
>
> Tomas
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com
> [mailto:detomaso-bounces at realbig.com]On Behalf Of David D Fisher
> Sent: den 16 augusti 2012 18:24
> To: Ken Green; Pantera List Serve
> Subject: Re: [DeTomaso] Mechanics of after marker suspension bushings?
>
>
> Ken,
>
> (For the stock bushings at least), the only suspension movement once the
> A-Arm bolts are tight comes from the flex in the rubber inside the
> bushing. This is why you want to have the car on its wheels (at normal
> ride height) before tightening up the bushing bolts. The bushings are
> pressed into the A-Arms and dont move, and the bolts clamp down on the inner
> steel bush once you tighten them up. Once that is done, the only thing
> that can move is the rubber flexing.
>
> I would imagine that the assumption in this design is that you dont expect
> to have a lot of suspension travel under normal use.
>
> David
>
>
>
> ________________________________
> From: Ken Green <kenn_green at yahoo.com>
> To: Pantera List Serve <detomaso at realbig.com>
> Sent: Thursday, August 16, 2012 8:48 AM
> Subject: [DeTomaso] Mechanics of after marker suspension bushings?
>
> I took the suspension apart for powder coating and the control arms (A arms)
> all have after marker bushings. The control arms were pretty stuff and took
> a fairly strong push to move up or down. The bushings were very tight in
> the control arms so I assume they moved with the arms. I'm wondering how
> all of this should work? Should the control arms move freely with respect
> to the body or be stiff like this?
>
> Ken
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list