[DeTomaso] Removing ANSA resonator tips?

[Dave]

Then you use a magnetic retriever, springy thing with a magnet, mine is about 2 feet long. Go for it Rob.
IndyDave
From: Rob Dumoulin [mailto:rob at dumoulins.net]
Sent: Thursday, August 16, 2012 1:24 PM
To: Tomas Gunnarsson
Cc: Dave; MikeLDrew at aol.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Removing ANSA resonator tips?

I was going to try a step bit. You know, it looks like a spinning top. You could drill the top hole as big as the bit then punch right through to the next one. I'm scared that it will be a tight fit to snake it back out without pulling it off though.
On Thu, Aug 16, 2012 at 10:17 AM, Tomas Gunnarsson <guson at home.se<mailto:guson at home.se>> wrote:
But the perforated tube will bottom out inside the hole saw before it
reaches the other end of the tube.

Tomas

<-----Ursprungligt Meddelande----->
From: Dave [dave at damardirect.com<mailto:dave at damardirect.com>]
Sent: 16/8/2012 4:11:19 PM
To: Tomas Gunnarsson; MikeLDrew at aol.com<mailto:MikeLDrew at aol.com>
Cc: detomaso at realbig.com<mailto:detomaso at realbig.com>
Subject: Re: [DeTomaso] Removing ANSA resonator tips?

I have successfully used a bit extension (10-12") for drilling through
walls. I would think it would work for a hole saw.

IndyDave

-----Original Message-----
From: Tomas Gunnarsson [mailto:guson at home.se<mailto:guson at home.se>]
Sent: Wednesday, August 15, 2012 8:51 AM
To: MikeLDrew at aol.com<mailto:MikeLDrew at aol.com>
Cc: detomaso at realbig.com<mailto:detomaso at realbig.com>
Subject: Re: [DeTomaso] Removing ANSA resonator tips?

A Dremel like tool should do the same job as a hole saw close to the tip
but if the insert is welded at the oposite end neither a normal hole saw
nor a grinding tool will reach that deep.

Tomas

<-----Ursprungligt Meddelande----->
From: MikeLDrew at aol.com<mailto:MikeLDrew at aol.com> [MikeLDrew at aol.com<mailto:MikeLDrew at aol.com>]
Sent: 15/8/2012 2:18:27 PM
To: detomaso at realbig.com<mailto:detomaso at realbig.com>
Subject: [DeTomaso] Removing ANSA resonator tips?

Hi guys,

Has anybody successfully removed ANSA resonators from the tips, leaving
just the chrome tips? The resonators provide quite a restriction to
exhaust flow, and Andy in the UK (he of the launching GT5-S) is looking
for cheap horsepower. I seem to remember somebody successfully doing the
job with a holesaw with the mufflers still on the car?

Mike
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com<mailto:DeTomaso at list.realbig.com>
http://list.realbig.com/mailman/listinfo/detomaso
..


_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com<mailto:DeTomaso at list.realbig.com>
http://list.realbig.com/mailman/listinfo/detomaso
.

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com<mailto:DeTomaso at list.realbig.com>
http://list.realbig.com/mailman/listinfo/detomaso



--
Rob DuMoulin
904.476.8744
rob at dumoulins.net<mailto:rob at dumoulins.net>