[DeTomaso] Removing ANSA resonator tips?

Dave dave at damardirect.com
Thu Aug 16 10:26:20 EDT 2012


Good point! I was just thinking of the reach. Don't know how "weak" the perfs are. Wonder if you could drill in sections, somehow extracting the sections. I don't have a recommendation.
Maybe a machine shop could do it?
IndyDave

From: Tomas Gunnarsson [mailto:guson at home.se]
Sent: Thursday, August 16, 2012 10:17 AM
To: Dave
Cc: MikeLDrew at aol.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Removing ANSA resonator tips?

But the perforated tube will bottom out inside the hole saw before it reaches the other end of the tube.

Tomas

<-----Ursprungligt Meddelande----->
From: Dave [dave at damardirect.com]
Sent: 16/8/2012 4:11:19 PM
To: Tomas Gunnarsson; MikeLDrew at aol.com<mailto:MikeLDrew at aol.com>
Cc: detomaso at realbig.com<mailto:detomaso at realbig.com>
Subject: Re: [DeTomaso] Removing ANSA resonator tips?

I have successfully used a bit extension (10-12") for drilling through walls. I would think it would work for a hole saw.

IndyDave

-----Original Message-----
From: Tomas Gunnarsson [mailto:guson at home.se]<mailto:[mailto:guson at home.se]>
Sent: Wednesday, August 15, 2012 8:51 AM
To: MikeLDrew at aol.com<mailto:MikeLDrew at aol.com>
Cc: detomaso at realbig.com<mailto:detomaso at realbig.com>
Subject: Re: [DeTomaso] Removing ANSA resonator tips?

A Dremel like tool should do the same job as a hole saw close to the tip but if the insert is welded at the oposite end neither a normal hole saw nor a grinding tool will reach that deep.

Tomas

<-----Ursprungligt Meddelande----->
From: MikeLDrew at aol.com<mailto:MikeLDrew at aol.com> [MikeLDrew at aol.com]
Sent: 15/8/2012 2:18:27 PM
To: detomaso at realbig.com<mailto:detomaso at realbig.com>
Subject: [DeTomaso] Removing ANSA resonator tips?

Hi guys,

Has anybody successfully removed ANSA resonators from the tips, leaving just the chrome tips? The resonators provide quite a restriction to exhaust flow, and Andy in the UK (he of the launching GT5-S) is looking for cheap horsepower. I seem to remember somebody successfully doing the job with a holesaw with the mufflers still on the car?

Mike
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com<mailto:DeTomaso at list.realbig.com>
http://list.realbig.com/mailman/listinfo/detomaso
..


_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com<mailto:DeTomaso at list.realbig.com>
http://list.realbig.com/mailman/listinfo/detomaso
.



More information about the DeTomaso mailing list