[DeTomaso] 12V For The Holley Choke
SOBill at aol.com
SOBill at aol.com
Thu Aug 16 00:41:03 EDT 2012
I know of no place in the Pantera engine compartment which provides
ignition switched 12 volts.
The Stator terminal of the Pantera alternator is used to provide 6 volts
to the Ford Autolite carburetor choke when the engine is running. As 6 volts
is 1/2 the voltage required by the Holley choke, the choke will only draw
1/2 the normal current and will produce only 1/4 the normal heating effect.
The Holley choke connected to the Pantera alternator Stator terminal will
take 4x longer than normal to fully open.
If you remove the passenger door side seat belt anchor, it is easy to run
a wire aft to the engine compartment and forward to the area of the fuse
box. Splice the new wire into a wire on the fuse side of Fuse 11 or 12 and
connect the other end to the Holley choke. You will now have the Holley choke
active with 12 volts in the START and RUN positions of the IGNITION switch.
Have fun today,
sobill at aol.com
More information about the DeTomaso
mailing list