[DeTomaso] Trans Cooler
Tomas Gunnarsson
guson at home.se
Thu Aug 9 16:40:56 EDT 2012
Yes, that's what I meant. Wouldn't be too hard to make an end plate for
Pantera orientation though, just run the pump off the other shaft.
Tomas
-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of MikeLDrew at aol.com
Sent: den 9 augusti 2012 21:51
To: guson at home.se; gow2 at rc-tech.net; detomaso at realbig.com
Subject: Re: [DeTomaso] Trans Cooler
In a message dated 8/9/12 12 20 26, guson at home.se writes:
> That oil pump is new to me. What I'd seen before was a pump incorporated
> in
> the rear end plate of the ZF. It shows in some of the documents I have on
> a
> trans mounted flipped compared to the Pantera.
>
>>>That was developed for the racing versions of the BMW M1. I didn't
bother mentioning it, because it apparently draws the oil from the rear of
the
gearbox, through the pump, and out to the cooler.
http://www.gt40s.com/forum/attachment.php?attachmentid=49906&d=1291291248
In the Pantera orientation, the pump would be operating in air, not oil,
and thus wouldn't work.
Mike
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list