[DeTomaso] Window motor mensa.

[bill gaino]

You have to get rid of the antique motor and replace with the Areostrar motors. I did it 8 years ago and never looked back. They are faster too. The procedure is outlined here.  http://www.panteraplace.com/page164.htm

-----Original Message-----
>From: Dave <dave at damardirect.com>
>Sent: Aug 7, 2012 1:38 PM
>To: Dave Londry <davel at emspace.com>, Pantera List <DeTomaso at realbig.com>
>Subject: Re: [DeTomaso] Window motor mensa.
>
>You know, Larry (Cleveland) has the same problem, All I got was a little click and  a faint hum - Power getting there but no action.
>
>What say Larry?
>
>IndyDave
>
>-----Original Message-----
>From: Dave Londry [mailto:davel at emspace.com] 
>Sent: Tuesday, August 07, 2012 1:25 AM
>To: Pantera List
>Subject: [DeTomaso] Window motor mensa.
>
>Yesterday I got home from a hot day at the local historics and went to run up the driver's window.
>All I got was a little click and  a faint hum - Power getting there but no action.
>When I got in there today and moved it off-bottom with the manual drive, it run up just fine.
>But, whenever it ran all the way down, it was 50/50 if it would run up.
>I saw that the motor was flexing in it's mount when the window hit bottom,
>  so i moved the travel stop out more.
>Now with the glass stopping 3/4" above the sill it goes up almost all the time.
>
>What's the best guess here?
>Maybe long-term flexing cracked a connection in the motor, and when it's flexed now it has a really high resistance?
>dave
>
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso


If you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com