[DeTomaso] Wheel offset (ET)

michael@michaelshortt.com michaelsavga at gmail.com
Wed Aug 1 13:08:28 EDT 2012


Yes, I think that is exactly what that means.

Michael Shortt



On Wed, Aug 1, 2012 at 1:06 PM, Bjoern Flesland <bflesland at gmail.com> wrote:
> Thanks for helping out.
> They are stamped the following:
>
> Front
> 28 85 8 LA3
> 8.5JX18H2E64
>
> Rear
> 28 13 8 LA
> 13JX18H2E39
>
> Could that indicate ET of 64 and 39 mm?
>
> Cheers Bjoern
> Sent from my iPhone
>
>
> Den 1. aug. 2012 kl. 19:36 skrev "Tomas Gunnarsson" <guson at home.se>:
>
> If you have used the same edges as reference for all measurements the narrow
> rim has ET70 and the wide rim ET51.
>
> Tomas
>
> <-----Ursprungligt Meddelande----->
> From: Bjoern Flesland [bflesland at gmail.com]
> Sent: 1/8/2012 6:22:47 PM
> To: POCA Detomasolist Realbig
> Subject: [DeTomaso] Wheel offset (ET)
>
> I am trying to determine the offset (ET) of two wheels and need some advise:
>
> One wheel measure 184 mm from the mounting face/flange to the inner rim
> edge.
> Wheel width is 228 mm.
>
> The other measure 216 mm from the mounting face/flange to the inner rim
> edge.
> Wheel width is 330 mm.
>
> Appreciate your help. Thanks!
> Cheers Bjoern
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> .



-- 







Michael L. Shortt
Savannah, Georgia
www.michaelshortt.com
michael at michaelshortt.com
912-232-9390


This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.  If you are not the intended recipient, you are hereby notified
that any retention, dissemination, distribution or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received this message in error, then delete it.  Thank you



More information about the DeTomaso mailing list