[DeTomaso] Wheel offset (ET)
Bjoern Flesland
bflesland at gmail.com
Wed Aug 1 13:06:32 EDT 2012
Thanks for helping out.
They are stamped the following:
Front
28 85 8 LA3
8.5JX18H2E64
Rear
28 13 8 LA
13JX18H2E39
Could that indicate ET of 64 and 39 mm?
Cheers Bjoern
Sent from my iPhone
Den 1. aug. 2012 kl. 19:36 skrev "Tomas Gunnarsson" <guson at home.se>:
> If you have used the same edges as reference for all measurements the narrow rim has ET70 and the wide rim ET51.
>
> Tomas
>
> <-----Ursprungligt Meddelande----->
> From: Bjoern Flesland [bflesland at gmail.com]
> Sent: 1/8/2012 6:22:47 PM
> To: POCA Detomasolist Realbig
> Subject: [DeTomaso] Wheel offset (ET)
>
> I am trying to determine the offset (ET) of two wheels and need some advise:
>
> One wheel measure 184 mm from the mounting face/flange to the inner rim edge.
> Wheel width is 228 mm.
>
> The other measure 216 mm from the mounting face/flange to the inner rim edge.
> Wheel width is 330 mm.
>
> Appreciate your help. Thanks!
> Cheers Bjoern
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> .
More information about the DeTomaso
mailing list