[DeTomaso] Edelbrock carbs

[Charles Engles]

Dear Bill,


                 Well, you asked for an opinion.

            After years of suffering headaches with Holleys, I finally
decided to have one custom purpose built for the engine I built in the
Pantera.  It worked so well that the second engine got the same treatment.
I think Charlie McCall is referring to the same fellow that I would
recommend to you.

           www.chucknuytten.com


          You can send him your carb with the appropriate data about your
drivetrain, engine and car.  When the carb returns, it will be near perfect
and specific for your engine.


          The other opinion is that if Edelbrock carbs work as well as
Roland says, then I am sorry I have committed to custom Holleys, but they do
run well .   



                              Warmest regards, Chuck Engles



-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of bill gaino
Sent: Sunday, April 15, 2012 1:42 PM
To: mailing list new
Subject: [DeTomaso] Edelbrock carbs

I just got home from the Rod Run in Tenn. 1362 was a big hit gathering lots
of attention. I had my Holley carb tuned just right when I left home, but
when I got stuck in traffic for a few minutes it started running rich, then
on the way home was surging. I had one of these Edelbrocks
http://www.jegs.com/i/Edelbrock/350/1412/10002/-1 on a SBC that was perfect
out of the box. I tempted to scrap the Holly DP and go with this. Any
opinions out there?  Bill 1362

If you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso