[DeTomaso] Motor Mount Orientation

[SG]

The engine was rebuilt once back in the eighties, but I don't know whether the frame mounts were taken out or not.  Everything seems to fit and line up though.
                                                      Shaun Gibson

--- On Thu, 4/5/12, Mike Thomas <mbefthomas at comcast.net> wrote:


From: Mike Thomas <mbefthomas at comcast.net>
Subject: RE: [DeTomaso] Motor Mount Orientation
To: "'SG'" <sdlgibson at sbcglobal.net>, detomaso at realbig.com
Date: Thursday, April 5, 2012, 10:48 PM




Thanks, that confirms.  Had they ever been out previously that you know of?
Mike



From: SG [mailto:sdlgibson at sbcglobal.net] 
Sent: Thursday, April 05, 2012 8:28 PM
To: detomaso at realbig.com; Mike Thomas
Subject: Re: [DeTomaso] Motor Mount Orientation







I just recently put the engine back in my Pantera, and had marked the frame mounts L and R so I could remember  which way to put them back.  The bolt holes in the frame mounts were biased to the front of the car.  
                                                                         Shaun Gibson

--- On Thu, 4/5/12, Mike Thomas <mbefthomas at comcast.net> wrote:


From: Mike Thomas <mbefthomas at comcast.net>
Subject: [DeTomaso] Motor Mount Orientation
To: detomaso at realbig.com
Date: Thursday, April 5, 2012, 8:46 PM


Regarding the bias in the bolt holes in the lower, frame mounted portion of
the motor mount, is the offset supposed to be forward or rearward?

Thanks
Mike Thomas


_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso