[DeTomaso] gas tank float switch

[richard bosch]

I cannot but help wondering what there is to like or how one evaluates one toilet flush system over another. And to use the term "really slick" in that reference you are obviously spending way too much time in the throne room....

Julian
At my house instead of the "throne room" we call it the library. : )--- On Tue, 4/3/12, MikeLDrew at aol.com <MikeLDrew at aol.com> wrote:

From: MikeLDrew at aol.com <MikeLDrew at aol.com>
Subject: Re: [DeTomaso] gas tank float switch
To: cengles at cox.net, theemonkey at yahoo.com
Cc: detomaso at realbig.com
Date: Tuesday, April 3, 2012, 7:52 PM



In a message dated 4/3/12 19 27 44, cengles at cox.net writes:





Then, once "fixed" it does "work",

but all the readings are lower than normal.   So, which way do you bend the

float arm to approach a correct reading?





You can experiment with your toilet float. :>)



Think of a pointer at the opposite end of the float--when the float goes up, the pointer goes down.   The further down the pointer goes, the higher the gauge reads.   If you bend the arm holding the float downwards, when the float goes up to the same level it was before, the pointer will be pointing further down, meaning the gauge will read higher. :>)



Mike