[DeTomaso] shifting problems

JDeRyke at aol.com JDeRyke at aol.com
Wed Sep 14 13:23:34 EDT 2011


I had one Pantera here that would not shift into 2nd or 4th no matter what 
I adjusted. Turned out to be the Hall replacement gate panel on the console: 
the opening was slightly too narrow for this car. I had to bevel the sides 
of the opening 45 degrees for enough swing on the stick to reliably engage 
both sets of gears. Try taking off the gate panel & see if the thing shifts 
correctly. Good luck- J Deryke


More information about the DeTomaso mailing list