[DeTomaso] shifting problems

[Dave Londry]

I was hoping it was just bound-up at the trunnion or thereabouts.
Sounds like it's inside the ZF.
I'll shut up and let the ZF-knowledgeable respond

Crappola.
dave

On 9/9/2011 2:37 PM, mark skwarek wrote:
> Its easy to move around.
>
> *From:* Dave Londry <davel at emspace.com>
> *To:* mark skwarek <ehpantera at yahoo.com>
> *Cc:* "detomaso at realbig.com" <detomaso at realbig.com>
> *Sent:* Friday, September 9, 2011 5:34 PM
> *Subject:* Re: [DeTomaso] shifting problems
>
> Is it stiff to move around?
> Do you still get all gears if you're patient?
> dave
>
> On 9/9/2011 2:27 PM, mark skwarek wrote:
> > During my last outing at Watkins Glen, I had a problem getting into 
> first. Ultimately there is a problem shifting into all gears. The 
> shift lever does noot center itself but stays in the position it was 
> last left in. Looking for your thoughts and suggestions.
> >
> > Mark
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com <mailto:DeTomaso at list.realbig.com>
> > http://list.realbig.com/mailman/listinfo/detomaso
> >
> >
>
>