[DeTomaso] Pedal Box
gow2 at rc-tech.net
gow2 at rc-tech.net
Thu Oct 27 05:30:54 EDT 2011
Thanks Chance!
Gary
On Wed, 26 Oct 2011 19:11:46 -0700 (PDT), Chance Dorsey
<chance.dorsey at yahoo.com> wrote:
> I had to search today to find the box that the bearing came in, but I
> finally found it.
>
> The bearing is an HK0808. It measures 8mm x 12mm x 8mm. As Asa
> recommended, I'll add that number to my photo at poca.com.
>
> Also, I should give credit where credit is due. Bill Bitner here in
> Austin actually came up with the idea. His car has had the same
treatment
> and it works very nicely.
>
> The parts from my pedal box were, to use a Texas term "wallowed out"
> pretty badly. This brought everything back into spec, and will probably
> never have to be replaced.
>
> Thanks,
>
> Chance
>
>
>
>
> ________________________________
> From: "gow2 at rc-tech.net" <gow2 at rc-tech.net>
> To: Chance Dorsey <chance.dorsey at yahoo.com>
> Cc: "gow2 at rc-tech.net" <gow2 at rc-tech.net>; "detomaso at realbig.com"
> <detomaso at realbig.com>
> Sent: Wednesday, October 26, 2011 8:07 AM
> Subject: Re: [DeTomaso] Pedal Box
>
> That.s a good idea. It would be nice to have the bearing part for
> reference. These were pretty tight. I had to press them out.
>
> Gary
>
>> Another nice upgrade is to bore out and insert bearings into the pivot
>> points.
>>
>> It really tightens things up nicely if there was any slop before.
>>
>> http://www.poca.com/index.php/gallery/?g2_itemId=8668
>>
>> http://www.poca.com/index.php/gallery/?g2_itemId=8677
>>
>> I can give you the bearing numbers I used in mine if you need them.
>>
>> Thanks, Chance
>>
>> On Oct 25, 2011, at 2:49 PM, gow2 at rc-tech.net wrote:
>>
>>> I was reworking my pedal box thought I would post some photos. They
were
>>> pretty nasty before I started.
>>>
>>> I blasted and powder coated the pedals black. I blasted the plate. I
>>> tried
>>> the Chrome powdercoating. I figured it would be more like aluminum. It
>>> was
>>> a little more blingy then I wanted but it will be ok.
>>>
>>> Waiting on a few parts to put it back together.
>>>
>>> http://www.rc-tech.net/pantera1/pedal/pb5.jpg
>>>
>>> http://www.rc-tech.net/pantera1/pedal/pb2.jpg
>>>
>>> http://www.rc-tech.net/pantera1/pedal/pb3.jpg
>>>
>>> http://www.rc-tech.net/pantera1/pedal/pb4.jpg
>>>
>>>
>>> Gary
>>> _______________________________________________
>>>
>>> Detomaso Forum Managed by POCA
>>>
>>> Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
>>>
>>> DeTomaso mailing list
>>> DeTomaso at list.realbig.com
>>> http://list.realbig.com/mailman/listinfo/detomaso
>>
More information about the DeTomaso
mailing list