[DeTomaso] Pedal Box

[gow2 at rc-tech.net]

That.s a good idea. It would be nice to have the bearing part for
reference. These were pretty tight. I had to press them out.

Gary

> Another nice upgrade is to bore out and insert bearings into the pivot
> points.
>
> It really tightens things up nicely if there was any slop before.
>
> http://www.poca.com/index.php/gallery/?g2_itemId=8668
>
> http://www.poca.com/index.php/gallery/?g2_itemId=8677
>
> I can give you the bearing numbers I used in mine if you need them.
>
> Thanks, Chance
>
> On Oct 25, 2011, at 2:49 PM, gow2 at rc-tech.net wrote:
>
>> I was reworking my pedal box thought I would post some photos. They were
>> pretty nasty before I started.
>>
>> I blasted and powder coated the pedals black. I blasted the plate. I
>> tried
>> the Chrome powdercoating. I figured it would be more like aluminum. It
>> was
>> a little more blingy then I wanted but it will be ok.
>>
>> Waiting on a few parts to put it back together.
>>
>> http://www.rc-tech.net/pantera1/pedal/pb5.jpg
>>
>> http://www.rc-tech.net/pantera1/pedal/pb2.jpg
>>
>> http://www.rc-tech.net/pantera1/pedal/pb3.jpg
>>
>> http://www.rc-tech.net/pantera1/pedal/pb4.jpg
>>
>>
>> Gary
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>