[DeTomaso] Balance Point for Engine/Transaxle Removal
Larry - Ohio Time Corp
larry at ohiotimecorp.com
Wed Nov 2 13:47:48 EDT 2011
<< I can give it to Kirk>>
If you're done with it, give it to Kirk. If you're done with any of the
parts from the motor dyno testing and he has the room.... :)
Larry - Cleveland
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Daniel C Jones
Sent: Tuesday, November 01, 2011 6:29 PM
To: Pantera REALBIG forum
Subject: Re: [DeTomaso] Balance Point for Engine/Transaxle Removal
> The balance point is roughly over the oil pressure sender at the back of
the
> block, when the gearbox is connected to the engine.
Thanks guys for the pics and suggestions. For some reason I had brain fade
on this. With the low intake manifold currently installed, I should be able
to
use the load leveler with 4 point mounting (chain across heads front and
rear).
With a taller intake, it's probably easier to just use a chain across the
back
of the heads.
> If you're not going to use the load leveler you may as well send it back
to
> it's home.... :)
Send me that shipping address or I can give it to Kirk to drop off.
He's coming
through on his way back from Texas in week or so.
Dan Jones
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list