[DeTomaso] Tilting the raditator and front mounted AC Condenser?
JDeRyke at aol.com
JDeRyke at aol.com
Tue May 24 01:14:31 EDT 2011
In a message dated 5/23/11 9:54:59 PM, kenn_green at yahoo.com writes:
> Do people generally cut away the original fan mounts to make room to tilt
> the radiator forward and mount a condenser?
>
Yes, because the empty bracketry blocks needed airflow into the radiator
and looks clunky with the fan motors gone. The sucker-fan setup WITH A SHROUD
is far more efficient in moving air through the rad core at low road speeds,
as the shroud forces air to pass through the entire core, not just two 11"
disc-shaped areas as with the pusher fans. Swept core area is most
important, not fan blade size or speed.
The tilt- fwd configuration is only for convenience in hooking up the hoses
and fans. There is no performance benefit in any reasonable radiator
mounting position, but it certainly hurts to rub your hands and arms continually
across a straight-up rad core during hookup- it's like a cheese grater and as
Carroll Smith once said, 'blood is a poor lubricant and is slightly
corrosive to light alloys'. Cheers- J Deryke
More information about the DeTomaso
mailing list