[DeTomaso] Solved- Tech Session and ZF question
Peter Kovacs
peter-kovacs at sbcglobal.net
Mon May 23 01:26:47 EDT 2011
Nice polished aluminum calipers with the Logo machined in to it. I'm not sure if
the bolt would be special, have a shoulder, etc.
Peter Kovacs
209 345-6708
209 436-2000 fx
________________________________
From: "MikeLDrew at aol.com" <MikeLDrew at aol.com>
To: peter-kovacs at sbcglobal.net; MikeLDrew at aol.com; detomaso at realbig.com
Sent: Sun, May 22, 2011 10:01:12 PM
Subject: Re: [DeTomaso] Solved- Tech Session and ZF question
In a message dated 5/22/11 21 57 38, peter-kovacs at sbcglobal.net writes:
Chuck- will any of the pictures you took help me figure out which nut/bolt to
get?
What kind of brakes do you have?
If you have stock brakes, you just need stock bolts, no?
01005E- BOLT CAL. M10 X 1.5 X 35m *
$0.48
And if you have aftermarket brakes, then likely your calipers are bolted to
brackets, and the brackets are in turn bolted to the upright. You say you're
missing a bolt? Just take the non-missing bolt out, and go get another one like
that!
Mike
More information about the DeTomaso
mailing list