[DeTomaso] Swapping Clutch Maser - HELP

[John Taphorn]

Mike

Hang a box wrench on the nut in the footwell.  Easily turn the bolt on the 
trunkside and eventually the box wrench will swing and hit an immovable 
object.  Generally, the wrench will stay on while you gently turn the bolt.

JT
----- Original Message ----- 
From: "Mike Thomas" <mbefthomas at comcast.net>
To: "'DeTomaso Forum'" <detomaso at realbig.com>
Sent: Wednesday, May 18, 2011 9:53 PM
Subject: [DeTomaso] Swapping Clutch Maser - HELP


> OK, so the responses to swapping the clutch master made it seem to be
> relatively easy.  Nope.
>
> I got the fluid line off easy enough.  Then loosened both nuts just enough
> to let the bolts start spinning.  When I got up under the dash, I can 
> barely
> put a finger on the top bolt, and could see that I might be able to get a
> screwdriver jammed into the bottom bolt to hold it in place, but with the
> effort reduction kit, how in the heck are your supposed to be able to get
> anything on that top bolt to get it undone.
>
> I'm stuck!!
>
> Thanks in advance
> Mike Thomas
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>