[DeTomaso] Milodon Oil Pan Gaskets, and installing oil pan gaskets

[Sean Korb]

http://www.autozone.com/autozone/accessories/Fel-Pro-5-16-in-engine-and-transmission-oil-pan-SnapUps?itemIdentifier=155047

Neeto!

On Sun, May 15, 2011 at 12:04 PM, Daniel C Jones
<daniel.c.jones2 at gmail.com> wrote:
>> Then comes the fun of sticking the new gasket UP against gravity and
>> getting the holes aligned--and then placing the oil pan without knocking
>> the gasket out of alignment----against gravity.
>
> I have a set of special studs that I use on oil and transmission pans when
> fighting gravity.  They are tapered and spring loaded.  Screw them in at
> least the four corners and you can just push the pan into place and the
> studs will hold the pan (and gasket) in place while you screw the bolts in
> the rest of the holes.  Then unscrew the studs and replace with bolts.
> I inherited these so I'm not sure where one would buy a similar set.
>
> Dan Jones
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>



-- 
Sean Korb spkorb at spkorb.org http://www.spkorb.org
'65,'68 Mustangs,'68 Cougar,'78 R100/7,'60 Metro,'59 A35,'71 Pantera #1382
"The more you drive, the less intelligent you get" --Miller
"Computers are useless.  They can only give you answers." -P. Picasso