[DeTomaso] NPC! Need longer racing harness belt brackets for NORC/SSCC

asajay at asajay.com asajay at asajay.com
Fri May 6 16:24:52 EDT 2011


You might try looking here:
http://www.schrothracing.com/store/Competition/hardware/bolt-in-hardware

Otherwise I'm not sure how to help.  I'm having a hard time picturing  
the application.

Are you using an adjustable belt?  Adjustable at the inside (body)  
end, not the outside (attach point) end?  I would think once you have  
it bolted down it shouldn't matter.

Asa Jay


Quoting Bjoern Flesland <bflesland at gmail.com>:

> Hi AJ,
> No this eyebolt and clip on bracket will not work unfortunately.
> I need to use a bolt down bracket because of the very tight space.
> There must be some race gear vendors that sells longer brackets I believe!?!?
> Who can that be?
> Cheers Bjoern
>
> Sent from my iPhone
>
>
> Den 6. mai 2011 kl. 10:08 skrev Asa Jay Laughton <asajay at asajay.com>:
>
>> Bjoern,
>>
>> Another possible solution:
>>
>> Buy one or two of these:
>> http://www.summitracing.com/parts/SIM-31018/
>>
>> Then a couple of these:
>> http://www.summitracing.com/parts/GFR-107W/
>>
>> Be sure to use a small cotter pin or safety wire on the latch once
>> they are attached.  Part of the rules.
>>
>> This is what I used on my Pantera and they work great.  This would
>> give you the flexibility you need to thread the belt I think.
>>
>> The eye-bolt should fit any standard seat belt mounting hole.
>>
>> Let us know what you think.
>> Asa Jay
>>
>> Quoting Bjoern Flesland <bflesland at gmail.com>:
>>
>>> Does anybody know where I quickly can I get hold of a longer type   
>>> of harness
>>> belt "bolt down bracket ends"?
>>> I only need one bracket.
>>>
>>> The ones they have at Summit and Jegs are just a bit too short.
>>>
>>> I need a bracket that sticks up more (is higher) when bolted in at the
>>> factory lap belt mounting point.
>>> This so I can access it and insert the lap belt thru it.
>>>
>>> Summit Racing call them "bolt down bracket", brand G-Force:
>>>
>>> G-FORCE Racing 103H* - G-FORCE Seat Belt Bolt-Down Ends*
>>> G-FORCE Racing 103W* - G-FORCE Seat Belt Bolt-Down Ends*
>>>
>>> Both these 2 in and 3 in (belt width) types they have are a bit too short.
>>>
>>> Or does there maybe exist a type of extender that can be fitted?
>>>
>>> The bolt hole needs to be 5/8 in.
>>>
>>> Any help very much appreciated.
>>> Cheers Bjoern
>>> _______________________________________________
>>>
>>> Detomaso Forum Managed by POCA
>>>
>>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>>
>>> DeTomaso mailing list
>>> DeTomaso at list.realbig.com




More information about the DeTomaso mailing list