[DeTomaso] 4 bolt ZF's?

[John Buckman]

The dash 1 input shaft has a 1-1/8" 10 spline.  I think the dash 0 is the same.
The dash 2 input shaft has a 1-1/16" 10 spline.

The pilot bearing for the dash 1 was indeed a roller bearing.  It mounted in an
adapter that moved the bearing aft due to the shorter input shaft, as Mike Drew
mentioned.  It also had a cork seal and retainer, as can be seen in the link below.
Looks pretty good for being in service for 108K miles.  That was the first time that
the ZF had been removed from the car.

John

http://www.poca.com/index.php/gallery/?g2_itemId=30780