[DeTomaso] Parts for Rear Uprights

[JDeRyke at aol.com]

In a message dated 3/23/11 7:49:09 AM, julian_kift at hotmail.com writes:

> But IMO if you need shafts you likely need the bushings etc. that goes 
> with them and all the vendors sell the kit complete.
> 

And some kits use gun-drilled lower shafts with a zerk fitting in each end, 
so the system can be serviced without disassembly. Breakage and seizure 
comes from no grease in critical areas. Good luck- J Deryke