[DeTomaso] master cylinder advice
peter-kovacs at sbcglobal.net
peter-kovacs at sbcglobal.net
Tue Mar 22 22:32:33 EDT 2011
I had that issue and it stumped local shops as well as a PCar vendor. A second vendor Tommy Hodges of Extreme Pantera easily identified the problem and solved it quickly. I'd confirm your findings with him before spending any $$. I wish I would have.
Sent on the Sprint® Now Network from my BlackBerry®
-----Original Message-----
From: Justin Greisberg <justingreisberg at hotmail.com>
Sender: detomaso-bounces at realbig.com
Date: Tue, 22 Mar 2011 16:48:20
To: <detomaso at realbig.com>
Subject: [DeTomaso] master cylinder advice
Sso i put together my own brake system using wilwood superlite 4 piston calipers up front. I ended up using a ford master cylinder with a 7/8" bore, which i suspected was small. As i begin to drive the car, i am finding a very soft, spongy pedal with a lot of travel. I plan to go to a bigger bore master cylinder. I could easily use the ford SVO 84-86 1.125" master cylinder, but I worry that might be too much the other way. Although other fords have had 1" master cylinders, they generally have an angled reservoir which just looks funny, but wilwood makes a 1" master cylinder that is more money.
anyway, any suggestions 1 or 1.125" justin
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list