[DeTomaso] MSD distributors - WTF?

[Charles McCall]

I can only muddy the waters by saying that there ARE MSD distributors that
fit under an engine cover, as I run one. 

I'm not at home right now so I can't tell you which one I have, but I do
know that it's possible. FWIW. 

Charles McCall
1985 DeTomaso Pantera GT5-S #9375
"Raising Pantera Awareness Across Europe"
http://www.poca.com/index.php/gallery/?g2_itemId=2323

-----Mensaje original-----
De: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] En
nombre de boyd casey
Enviado el: lunes, 27 de junio de 2011 20:00
Para: cengles at cox.net
CC: detomaso at realbig.com
Asunto: Re: [DeTomaso] MSD distributors - WTF?

I use the 8577 and for me the fitment issue was the fire wall. The 8577 has
a "narrow" cap. I don't run an engine cover either so this was not an issue
or concern for me.
Boyd

On Mon, Jun 27, 2011 at 1:46 PM, <cengles at cox.net> wrote:

>
> Dear Erik,
>
>
> Hmmm, I seem to recall you inquiring about distributor fitment a while
back
> and IIRC, the correct answer was the MSD 8577, which provides the most
> clearance between the dist. and bulkhead. I quit using an engine cover
years
> ago and I didn't realize that parameter was also a critical fitment issue.
> Good luck with the Windsor unit. Hopefully, someone who is still using the
> engine cover and an MSD distributor can advise you about what will fit.
>
> Warmest regards, Chuck Engles
>
>
> ---- Erik Anderson <eanderson at geotracinternational.com> wrote:
> > OK, I am going through some major frustration in trying to replace my
> > Motorcraft dist with a new MSD ...
> >
> > (I should note that - with the exception of the distributor - I run a
> > complete MSD ignition system: 6AL, tach adapter, SS blaster coil,
> > wires.)
> >
> > The major issue with the first two MSD's I have bought (the 8477 and the
> > 8577) is that they are too tall. One of the wire plugs on the dist
> > would have to be angled and the engine cover screen would no longer be
> > able to go back on. All this comes after several people have told me
> > that they are running both models without issue.
> >
> > The speed shop here told me that I need the 8578 with a new gear:
> >
> > http://www.msdignition.com/Products/Distributors/Ford/Street/Strip/8578_
> > -_Ford_351W_Small_Diameter_Pro-Billet_Distributor.aspx
> >
> > I'm heading down right now to take a look. I know, I know ... I should
> > have done the work myself; but I just didn't have the time this year.
> >
> > Any feedback or advice would be appreciated.
> >
> > Thanks,
> > EA
> > #3528
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso