[DeTomaso] New blog site for my car

[Cullen McCann]

Thank you Mike.good advice..

 

From: MikeLDrew at aol.com [mailto:MikeLDrew at aol.com] 
Sent: Wednesday, June 22, 2011 12:06 PM
To: cmccann1972 at gmail.com; coreyjprice at gmail.com; detomaso at realbig.com
Subject: Re: [DeTomaso] New blog site for my car

 


In a message dated 6/22/11 6 50 18, cmccann1972 at gmail.com writes:





I'm trying to avoid
removing the driver quarter to replace the wheelhouse..



I think the thing to do would be to drill out all the spot welds joining the
inner wheelhouse to the quarter panel.  When mine was replaced, that was the
hope, but instead of doing that, the guy who supplied the replacement just
used a plasma cutter and buzzed it out, about two inches below the join.
That made the work of installing it in the car much more difficult. :<(

Mike