[DeTomaso] Electrical Help Needed
John Buckman
jb841 at cox.net
Mon Jun 6 22:51:01 EDT 2011
Will,
Continuing from the last post (I got interrupted), terminals #1 an #2 do not have to have any wires
connected to them. All you need is a wire connected to the BATT terminal. The other end of this
wire should be connected to the ammeter, if you have an ammeter. If you have a volt meter, then
this wire should be connected to the BAT terminal of the original starter solenoid.
To activate the dash warning light, connect the blue/black wire to terminal #1.
John
More information about the DeTomaso
mailing list