[DeTomaso] NPC: DOHC or Pushrod holy war.....Was: New Corvette Engine

[Curt Hall]

I've always like Corvettes! I've had a number of them! but if they put some little 3 liter ricer type 10,000 rpm engine the Corvette, you just know some dumb ass will in stall some Fart Cans on the damn thing!
 
Big block, Big horse power! These a reason the call then Muscle Cars!

--- On Fri, 6/3/11, Dave Londry <davel at emspace.com> wrote:


From: Dave Londry <davel at emspace.com>
Subject: [DeTomaso] NPC: DOHC or Pushrod holy war.....Was: New Corvette Engine
To: "michael frazier" <red3644 at hotmail.com>
Cc: "pantera list" <detomaso at realbig.com>
Date: Friday, June 3, 2011, 12:43 PM


Now if you said:
"There is no reason to build a DOHC engine instead of a SOHC engine"
  - I could get that. Twin cams are just more shit to keep spinning and 
the width is ugly,
     So long as you manage to place big valves, across a hemi chamber, a 
single cam is fine.

But a pushrod with in-line valves - that's just still more heavy shit to 
keep moving and to no benefit.

Now the direct injection system in the new LS is very fine - keep that part.
dave

(duckin' and weavin')



On 6/3/2011 12:28 PM, michael frazier wrote:
> Weak...very weak.  If you want to start a holy war, well then:
>
> I hope the new Vette doesn't go to a OHC engine more like the high-end Euro competition.  That would be a step
> backwards in performance if it ran like a F-car or Lambo.  Ford now builds engines bigger on the outside that an old Hemi,
> smaller on the inside than a 289, and just overly complicated.  I think you're now required to put your testicles in your
> purse when you buy a new (plastic magnet) Mustang.
>
> On an only slightly more serious note...I don't think they would gain anything over the LS engines.  Those are beautiful
> engines capable of much much more than they than come off the assembly line with.  Pushrods, overhead cams,
> in the real world one's not "better", they're just different.
>
> Michael Frazier
> Gruppo Rompiculi Corsa
> Pushrods are better.
>
>
>
>> Date: Fri, 3 Jun 2011 15:07:01 -0400
>> From: rob at dumoulins.net
>> To: detomaso at realbig.com
>> Subject: [DeTomaso] NPC: DOHC or Pushrod holy war.....Was: New Corvette Engine
>>
>> Personally, I believe a Dual Overhead Cam design is superior and wondered
>> why it took so long for US manufacturers to adopt it in their high-end
>> motors.
>>
>> Flame On
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>                           
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso