[DeTomaso] Chops Suitably Busted - ZF Coming Out
Forest Goodhart
forestg at att.net
Wed Jun 1 10:55:15 EDT 2011
I've removed several ZFs without removing or loosening anything on the engine
except the distributor cap. Have a small jack handy to raise the rear of the
engine. The whole operation can be done in about 4 hours. Oh, remember to remove
the small bolts that hold the block plate to the bellhousing.
________________________________
From: Larry Finch <fresnofinches at aol.com>
To: detomaso at realbig.com
Sent: Wed, June 1, 2011 7:40:38 AM
Subject: [DeTomaso] Chops Suitably Busted - ZF Coming Out
YEA MIKE!
Now that is the spirit we expected from you.
I agree with Asa on not touching the motor. Things should flex enough to allow
the removal of the ZF.
If not, THEN start loosening things up until you get the movement you need.
Larry
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list