[DeTomaso] pancake fan for condenser

[Bill Lewis]

Boy, it's going to be interesting to see what the mecho-tech dudes do with this.  Absolutely makes sense.     --OIL



> To: michael at michaelshortt.com
> From: tmshinro at aol.com
> Date: Mon, 11 Jul 2011 15:58:54 -0400
> CC: detomaso at realbig.com
> Subject: Re: [DeTomaso] pancake fan for condenser
> 
> 
>  I wired it so that the fan sucked air in from the outside of the car, which is how the factory fan worked.   Bill Gaino showed me at the Summer Summit that he sealed the sides of the condenser housing to prevent engine compartment air from being sucked through the condenser, which he said improved his cooling performance.   I'll be doing the same thing as soon as I can find some dense foam strips to stick in there.
> 
> Unfortunately my cooling performance was not as good when I took the car for a test drive with temps in the low 90s, high humidity and overcast.   I saw 38 degree air from the vents in my garage but after about 20 minutes of driving the vent temps rose to 55 degrees and pretty much stayed there.  I figured I was seeing temps about 35 to 40 degrees cooler than ambient, so I assume that is about as good as the system will do.   Curious if others are getting colder air in hot weather.
> 
>  
> Tom
> #5186
> 
> 
>  
> 
>  
> 
> -----Original Message-----
> From: michael at michaelshortt.com <michaelsavga at gmail.com>
> To: tmshinro <tmshinro at aol.com>
> Cc: detomaso <detomaso at realbig.com>
> Sent: Sun, Jul 10, 2011 9:24 pm
> Subject: Re: [DeTomaso] pancake fan for condenser
> 
> 
> did you hook it up to suck air into the car or blow air out of the car?
> Michael 
> On Jul 10, 2011 10:01 PM,  <tmshinro at aol.com> wrote:
> 
>  
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso