[DeTomaso] Blower motor replacement
Jim Gray
grayjim at att.net
Fri Jan 28 09:31:22 EST 2011
Not sure if the original style resistors are available. I have repaired two of
them (the ceramic base was broken) so they can be saved. I have also bought two
aftermarket ones that are adjustable. They were less than $15 each if I
remember correctly. I don't have the manufacturer name at hand just now. I'll
try and find it this evening and forward. You might try SOBill's data base.
Jim Gray
----- Original Message ----
From: "apleuss at charter.net" <apleuss at charter.net>
To: doug351c at gmail.com
Cc: Michael Becker <mikebecker at cox.net>; DeTomaso Forum <detomaso at realbig.com>
Sent: Fri, January 28, 2011 6:21:53 AM
Subject: Re: [DeTomaso] Blower motor replacement
Is the stock blwer resistor still available? If not, is there an
aftermarket that will work?
regards: Arnie #5725
On Thu, Jan 27, 2011 at 9:20 PM, doug351c wrote:
> Michael.
>
> Turn on the fan, take the two wires off of the heater resistor and
> touch
> them together. If the fan suddenly runs fast, your resistor or its
> connections are bad. If it still turns slow, turn the fan on again
> and
> touch the two resistor leads together but this time measure the
> voltage with
> a voltmeter between the connection you just made and good ground. If
> you
> read 12V then your motor or its ground connection is bad.
>
> Doug Braun
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com
> [mailto:detomaso-bounces at realbig.com]On Behalf Of Michael Becker
> Sent: Wednesday, January 26, 2011 8:40 PM
> To: 'Jim Gray'; DeTomaso at realbig.com
> Subject: Re: [DeTomaso] Blower motor replacement
>
> Jim,
> Are you replacing the motor because the old one broke, or because it
> was
> just too lame/powerless? I have a '71 and I can just barely feel a
> breeze
> out of the vents and there is almost no difference between low and hi.
> My
> air conditionaer works pretty good, but the fan doesn't have aenough
> power
> to push the cold air into the cabin. I've been wondering about
> options to
> increase the airflow. What sort of motor are you using as the
> replacement?
> Thanks,
> Mike
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at
> http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list