[DeTomaso] key not working?
JDeRyke at aol.com
JDeRyke at aol.com
Thu Jan 27 14:42:05 EST 2011
Sue, its usually just gummed up. But inside the ignition, there's a light
spring used to push the cylinder out a little, and that spring sometimes
breaks. If spray-lube doesn't free up the cylinder & shaft lock, you may need to
remove the whole switch and have it rebuilt. Removing the switch is a pain
'cause for security, there are two shear-screws that need drilling out. Bill
Taylor in CA does the rebuilding in his spare time, once its out.... Good
luck-
J DeRyke (who's switch has ALWAYS needed wiggling to release)
More information about the DeTomaso
mailing list