[DeTomaso] Auto Painting
John Taphorn
jtaphorn at kingwoodcable.com
Tue Jan 18 08:29:49 EST 2011
Bill
Thanks for the heads up on the reducer. We recognized that adding reducer
as a potential solution , but since we followed directions to the tee, felt
we may be compensating for another error. That makes good sense.
Three votes for the SATA
Thanks
JT
----- Original Message -----
From: "bill gaino" <gaino at earthlink.net>
To: "John Taphorn" <jtaphorn at kingwoodcable.com>; <detomaso at realbig.com>
Sent: Tuesday, January 18, 2011 7:20 AM
Subject: Re: [DeTomaso] Auto Painting
> JT, I paint cars everyday for my living. I use a Sata nr 3000 1.3 tip for
> silver and light metallic bases. I have a Sata rp 1.4 for my clear. Sata
> is a good unit as is the Iwata. You can do both base and clear with a 1.4
> tip. I used a Sata jet 90 alone for years, both base, and clear with the
> 1.4 tip. LISTEN to this story... I mixed and sprayed Dupont Centari
> according to the mix instructions on the can. When I achieved a lot of
> orange peel, I called in the Dupount tech. He told me that the mixing
> ratio's were to keep the VOC down in the state of Ca. He reccomended that
> I use 50% more reducer. Problem solved. It is hard to paint in the
> confines of the engine bay anyway. Try thinning the product a bit more.
> There are viscosoty test devices also, but I just look at the way the
> paint flows of the mixing stick. Bill 1362
>
> -----Original Message-----
>>From: John Taphorn <jtaphorn at kingwoodcable.com>
>>Sent: Jan 17, 2011 8:17 PM
>>To: detomaso at realbig.com
>>Subject: [DeTomaso] Auto Painting
>>
>>Several of us have been detailing Rob Pink's Pantera's rear engine bay.
>>It's been a long project; however, with several of us sanding and doing
>>metal work, we have had a fun time tackling it. We sprayed PPG Concept
>>Acrylic Urethane on our nicely sanded Primer Filler 2K on Saturday and
>>ended up with lots of orange peel. I suspect a combination of temps
>>slightly below the limits of the reducer, a Chinese HVLP knock off and any
>>other number of elements which can influence such things contributed.
>>
>>Anyway, we have got more sanding ahead of us and will endeavor to respray
>>another top coat when the weather is warmer. However, we have more paint
>>projects on the horizon and would like to acquire a better HVLP gun.
>>Preferably suited for base and clear coats. The idea of one gun for both
>>and a change of tips is fine. We'd probably continue with the Chinese
>>knock-offs for primer filler.
>>
>>Anyone with real experience in these matters that has preference?
>>
>>We are considering the SATAjet 3000 B, Iwata LPH 400LV, or DeVilbiss
>>GFG-670
>>
>>JT
>>_______________________________________________
>>
>>Detomaso Forum Managed by POCA
>>
>>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>>DeTomaso mailing list
>>DeTomaso at list.realbig.com
>>http://list.realbig.com/mailman/listinfo/detomaso
>
>
> If you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com
More information about the DeTomaso
mailing list