[DeTomaso] ANy first hand experience with Precision Proformance coolant pipe kit?

[John Buckman]

I used the one from Hall.  The 90* bend would not even come close to aligning with the
coolant tank tube.  If it were bent ~75* (instead of 90*), it would have been close.

The tube to the water pump  wouldn't work either.  I had to add a 1-1/2" piece in the middle.
Clearances are tight for this pipe, so cutting and adding straight hose and clamps would
probably create clearance issues.

Car is a '71.  YMMV

John

http://www.poca.com/index.php/gallery/?g2_itemId=29136