[DeTomaso] ZDDP?

[Dave Londry]

The 2009 chart says 1200 p 1300 zn, so that's fine.

But only 15W50 - no other Mobil1!
But only 15W50 - no other Mobil1!
But only 15W50 - no other Mobil1!
(sorry about the preemptive nagging)
dave
=========================
On 2/5/2011 7:32 PM, Pantdino wrote:
> Dan,
>
> Look on the bottle and see what rating the Mobil One is.
> If its from 2 yrs ago its probably pre-SM rating and should have enough ZDDP as it is.
>
> Jim
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Dan Courtney<dfcex at pacbell.net>
> To: JDeRyke at aol.com; detomaso at realbig.com
> Sent: Sat, Feb 5, 2011 4:51 pm
> Subject: Re: [DeTomaso] ZDDP?
>
>
> Jimminy Cricket - isn't anything simple anymore with a Pantera? Not even an oil
> hange?
> he engine builder lubed the new cam with break in grease, and I ran Kendall
> 0/50 with ZDDP for the first 1,000 miles, and then again for the next 2,000
> iles.
> his time (at 3,000 miles) I'll probably use up some of the Mobil One I've been
> itting on.
> heir website shows a chart with the amounts of ZDDP, so assuming it hasn't
> hanged since I bought this oil (2 years ago) I'll use their chart to figure how
> uch ZDDP addtitive to add, without over-doing it.
> irst, I'll contact Mobil One and see if the formulation has changed since 2009.
> t's no wonder everyone is going to hydraulic roller cams.
> ere is a link to their table: http://www.mobiloil.com/USA-English/MotorOil/Files/Mobil_1_Product_Guide.pdf
> Dan
> Dan Courtney
> 1 Years of Excellent Representation
> xcalibur Commercial Real Estate Services
> a Jolla, CA
> 858) 551-5455 P
> 858) 551-5456 F
>
> rom: JDeRyke at aol.com
> ent: Saturday, February 05, 2011 4:15 PM
> o: dfcex at pacbell.net ; detomaso at realbig.com
> ubject: Re: [DeTomaso] ZDDP?
>
> an, Summit sells both a 10W30 'break-in' oil from Comp Cams ($4.95/qt-
> CA-1590), or an additive from Comp Cams  ($10.95/12 oz -CCA-159) or from
> rick-Flow ($9.95/12 oz -TFS-94000). There are some indications that TOO MUCH
> DDP in your oil is nearly as bad as not enough, so by using 5 qts of Comp's
> break-in' oil, you avoid the guessing, mixing and extra expense needed to get
> he current-good levels of about 1200 ppm with someone else's 5 qts of oil. Good
> uck this year- J DeRyke
> ______________________________________________
>
>