[DeTomaso] DB Starters

[Mike Murray]

My studs must have been replaced. As I had bolts in mine and there was no need to do anything but unbolt and rebolt the new starter. This hoping you have bolts not studs. Mike  Go for it Larry



Mike Murray
American Dock & Marine Construction, Inc.
(843) 795-2999
www.americandock.net
  ----- Original Message ----- 
  From: MikeLDrew at aol.com 
  To: mjm at knology.net ; detomaso at realbig.com 
  Sent: Wednesday, February 02, 2011 11:25 AM
  Subject: Re: [DeTomaso] DB Starters



  In a message dated 2/2/11 4 08 12, mjm at knology.net writes:



    Chance, As I told Brent there are no mods to make the swap. The part # from DB Electrical is SFD0012 cost $41.00 plus $12.00 shipping. I just called them told them that I had a Pantera with a 351C. The # to DB is 1-800-753-2242. I used the info that SO Bill had in an E-mail from back in Oct 29,2009. And like he said follow these simple instructions and you will be ready to rock and roll.



  About the only modification that needs to be made is some judicious filing of the bolt holes in the starter.  Often they are just slightly too small to accept the metric studs.

  Oh, I forgot about something.  You need to get new, longer metric studs:

  http://www.poca.com/index.php/gallery/?g2_itemId=28733

  This is an original stud and a new one side-by-side.  I found them at my local Ace hardware store, no problem!

  Mike