[DeTomaso] Odd ZF Leak
MikeLDrew at aol.com
MikeLDrew at aol.com
Sun Aug 28 13:55:23 EDT 2011
In a message dated 8/28/11 10 50 45, julian_kift at hotmail.com writes:
> IIRC both the ZF and the angle drive are threaded so you have to get the
> nut on the angle drive thread backed out far enough or you can be tight on
> the ZF but not truly snugged down on the angle drive, if that makes sense.
>
There are is a rubber seal on the speedo gear and a rubber O-ring on the
speedo gear housing (the thing that the angle drive screws to), and either one
of those could be the source of your leak.
Look here:
http://www.panterasbywilkinson.com/webpages/catalog/ill11a.html
Parts #805 and #806.....
Mike
More information about the DeTomaso
mailing list