[DeTomaso] Odd ZF Leak

[Julian Kift]

Mike,

IIRC both the ZF and the angle drive are threaded so you have to get the nut on the angle drive thread backed out far enough or you can be tight on the ZF but not truly snugged down  on the angle drive, if that makes sense.

Julian

> From: mbefthomas at comcast.net
> To: detomaso at realbig.com
> Date: Sun, 28 Aug 2011 10:41:29 -0700
> Subject: [DeTomaso] Odd ZF Leak
> 
> I had my ZF rebuilt this past spring.  I've recently developed a leak from
> an odd location.  It seems to be seeping from the speedo cable connection
> where it bolts to the case.  I've tightened it, but didn't seem to make any
> difference, and it's enough of a leak to have left the frame cross member
> below it well coated, and leaves a few fresh drops every time a bring the
> car back in.  I'm going to check the oil level this afternoon to see just
> how much it's down, but this one has me curious.
> 
> Mike Thomas
> 
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso