[DeTomaso] Tool to torque ZF ring gear bolts
Garth Rodericks
garth_rodericks at yahoo.com
Mon Aug 8 23:30:38 EDT 2011
Yes, 12mm head 12 point bolts - part #'s are:
8ea 206-2803 for Rover "K" series flywheels
2ea M12AM.826-1F
M10 X 1.0 12pt flywheel bolts - drilled for safety wire. Pictures on the link below:
http://pantera.infopop.cc/eve/forums/a/tpc/f/9550045562/m/1350085745?r=5750097745#5750097745
Thanks!
Garth
________________________________
From: Forest Goodhart <forestg at att.net>
To: Garth Rodericks <garth_rodericks at yahoo.com>
Sent: Monday, August 8, 2011 5:21 PM
Subject: Re: [DeTomaso] Tool to torque ZF ring gear bolts
I assume you mean 12 point. What size head are they, 15mm?
________________________________
From: Garth Rodericks <garth_rodericks at yahoo.com>
To: DeTomaso Mail List <detomaso at realbig.com>
Cc: Mike Drew <mikeldrew at aol.com>; Rich Boschert <theemonkey at yahoo.com>; Brent Stewart <brent.stewart at yahoo.com>; Bob Benson <bob at rcbensonsons.com>; Steve Liebenow <steven.liebenow at att.net>
Sent: Mon, August 8, 2011 5:02:04 PM
Subject: [DeTomaso] Tool to torque ZF ring gear bolts
Does anyone in the SF Bay Area (PCNC) have a tool that will fit inside the ZF case to torque the ring gear bolts?
I'm planning to buy a 12mm box wrench and weld it to a 1/2" drive socket. Just thought I'd check if anyone has one sitting in their toolbox before I make my
own.
BTW - I cannot us a crow's foot because my new ARP bolts are hex head style.
Thanks!
Garth
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list