[DeTomaso] small technical problem

[Charles McCall]

Now we're getting somewhere... Wood? Steel?

On 8/3/11, Jerry R Knotts <knottsj at galstar.com> wrote:
> You might try to build a hump ramp (no comments from the peanut gallery).
> It will look like a set of mower loading ramps.  The ramp sould probably be
> about 2 to 3 meters long and about 150 cm high in the center, or as high as
> the car is tall behing the wheels.  The ramps only needs to be only about
> 150cm wide.  I use 2 x 6 material here.  and bow it with a side cut 2 x 6 in
> the middle.
>
> May work,
> jerry
> ----- Original Message -----
> From: "Charles McCall" <charlesmccall at gmail.com>
> To: <detomaso at realbig.com>
> Sent: Wednesday, August 03, 2011 3:28 PM
> Subject: [DeTomaso] small technical problem
>
>
>> HELP!!!
>> Short version - I changed jobs and had to relocate. Just arrived at
>> our rental house for the next year with the Pantera. There is a steep
>> slope going ffrom the street down to the garage and the car bottoms
>> out. I've tried backing in and various angles. Are there any
>> techniques or devices to get around this? This could be a real
>> problem. Thanks
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>
>