[DeTomaso] Clutch Plate Orientation

[Will Kooiman]

Mine will only install one way.  If you put it in backwards, the springs hit
the flywheel bolts.

Granted that might not be the case with all combos, but as someone said, the
flat side goes towards the flywheel.

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of MikeLDrew at aol.com
Sent: Saturday, April 30, 2011 5:51 PM
To: mbefthomas at comcast.net; detomaso at realbig.com
Subject: Re: [DeTomaso] Clutch Plate Orientation


In a message dated 4/30/11 14 54 14, mbefthomas at comcast.net writes:


> OK, so when I pulled my Centerforce clutch out I didn't pay attention to
> which side of the plate was facing the fly and which the pressure plate.
> 
> My bad.
> 
> So, which side goes to which . . . ?
> 

Uh...just look at the plate.   It's marked on one side.   Clean away the 
dust with brake cleaner and it will become obvious.

Mike
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso