[DeTomaso] 71's are a crapshoot to match parts...agree or disagree

[Tomas Gunnarsson]

Rob,

My ZF parts list for Dash-2 says M24x1.5. I may have notes from my own
Dash-1 rebuild in the garage on what the thread was on my trans.

Tomas

-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of Rob Dumoulin
Sent: den 28 april 2011 23:15
To: pantera list
Subject: [DeTomaso] 71's are a crapshoot to match parts...agree or
disagree


First of all, thanks to everybody that helped me source the M22 plug for the
side of my ZF. I got one from NAPA this morning.....but....it's not an M22
like my vendor said. It only cost me a quart of tranny oil on my garage
floor to determine the hole is larger than an M22. I put the top plug on the
side and now have this nifty looking periscope on the top of my Ziff, but I
was able to mount my driver side tranny mount. I've drilled out the broken
lower sway bar mount and noticed that with the driver side mount installed,
the passenger side mount is about 1/4 inch off center.  Looks like I'll be
making these mounts "adjustable".

The vendor states all the '71s are a crap shoot to get parts to fit. Agree
or Disagree?

--
Rob
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1209 / Virus Database: 1500/3602 - Release Date: 04/28/11